How to move a pool table across the room? Moving a pool table is not an easy task. The best way to move a pool table across the room is by using some sort of ramp. This article will provide you with how-to instructions on how to make your own, as well as how to buy one at a hardware store or online. It also includes how-to instructions for moving without any ramps and how to use other furniture in the room to help you if you can’t find anything else suitable for this purpose.
Create a plan of attack
Before you start moving the table, take some time to plan how you want to do it. You’ll need a ramp of some sort and lots of room for maneuvering with your furniture sliders or dollies. Make sure the place where you’re planning on going is free from obstacles like doorways, stairs, pets, or any loose items that might get knocked over.
Take a good look at how you want to move the table before getting started and make sure it can be done in one day–don’t plan on doing this task more than once because it’s hard work!
If someone is helping, ask them for help with your planning and assembly of ramps but do not let them do the moving for you.
Gather all the necessary tools before starting the project
– lumber for the ramps and furniture sliders or dollies
– a saw to cut your wood pieces with (a handsaw will do, but if you have access to an electric one it’s easier)
– sandpaper of some sort (again, preferably electric)
– drill/screwdriver with drill bits and screwdriver bit
– a level for the ramp (you’ll need this to make sure it’s straight)
– carpenter’s square or other straight edges to use as a guide for how high your table needs to be raised on the ramps in order for you to walk underneath without stooping down.
– some sort of lubricant for the furniture sliders or dollies
– a paintbrush to give your new ramps a good coat of paint (optional)
– some sort of padding for when you’re going over any rough surface, like carpet in someone’s house. This is optional but can help with how long it takes to move the table and how much it’s damaged.
– a cover for the table while it is being moved (optional, but recommended)
Clear a path for you to walk without bumping into anything
There are a few ways to do this:
– Clear the path by moving all of your furniture out of it.
– Make sure you have plenty of room for how large the table is–if not, make more space so there’s enough room to get around without bumping into anything. This might involve rearranging or getting rid of some furniture.
– Widen the path with a rug or other padding, like sliding pads that are meant for hardwood floors and used in offices.
Know the weight of your pool table
You should know how much your pool table weighs before you start moving it. This will help you determine how long the ramps need to be and how many pieces of lumber are needed for them.
For instance, a typical rectangular-shaped slate bed pool table can weigh up to 1200 pounds–that’s if there is no equipment on top like pockets, rails, or felt.
An average-size square pool table weighs about 800 pounds without any equipment on top of it and a junior-sized one should weigh less than 500 pounds with no equipment on top
These are just estimations–you’ll need to know how much your table actually weighs so you can plan for how long the ramps need to be.
If you don’t know how much your table weighs, take it off the floor and weigh it with a digital kitchen scale–this should give you an accurate number that will help with planning how many pieces of lumber you’ll need for the ramps so they can hold up the weight of your pool table.
Measure the distance from one side of the table to the other
Measure how far apart you need the two ramps to be in order for them to meet at one end. This might take some doing, but it is important so that your table can move without being damaged or falling off of a ramp and crashing down onto another object on the floor–like another piece of furniture!
Find a large, level surface to move it onto
You’ll need a large, level surface to do this on so the ramps will be flat while you move your table.
If there isn’t one in your home and you can’t find one outside of it–you’re going to have to make one out of boards or other material that is strong enough for how much weight the ramps are going to be holding.
In order for the ramps to stay flat, make sure there is no potential surface that could cause you problems–like a large gap between boards or crevices in cement.
Remove all the pieces and put them in a pile
You’ll need to remove all the pieces from your table so you can start moving them. You should take this time to clean off any grease or other grime that might be on them before you put them in a pile–this will help when painting them and they’re set up at their new location.
Roll up your sleeves and get ready for some heavy lifting!
You’ll need to take off any tables or other pieces from the top of the pool table before you start moving it. You should also remove all items that are on the floor around the pool table–these will only be in your way and make things more difficult for how big, heavy, and awkward this process is going to be.
You’re not going to be able to move it on your own–you’ll need help from someone else. You should use a ramp at either end of the pool table and have one person lift as you guide it with the other.
Put one end of the pool table on its side so that you can roll it across the room
Before lifting the other end, but one side of your pool table on its edge so that you can roll it across the room.
– For a rectangular slate bed pool table: You’ll need to have four pieces or ramps at each corner and two pieces in between–one for each person who is helping. One person will be guiding as the other person lifts.
– For a square pool table: You’ll need to have four pieces or ramps at each side and two pieces in between–one for each person who is helping. One person will be guiding as the other one lifts. (This might take three people)
– For a junior-sized pool table, you should only need two ramps and one person guiding.
– For a pub table, you’ll need three pieces of lumber to act as ramps–one for the front end of your pool table when it is on its side however this might not be enough if how big and heavy your pool table is so make sure that there are at least four pieces of lumber for how much weight the ramps are going to be holding.
– For a pool table with an end set: You’ll need one ramp at either side, or you can put it on its side and have someone guide from that point.
Place the other end of the pool table down and let gravity do its work!
After you’ve placed the other end of your pool table down, let gravity do its work.
How to move a pool table across the room? As a professional pool table movers, we have seen many different ways to move a pool table, and the best tip we can give is this- make sure you are moving it on level ground. It may not seem like that much of an issue but if your floor isn’t even then there’s going to be some serious wear and tear on the legs of your new billiards table in no time at all! Hopefully, these tips will help you find success when trying to decide how to get around those heavy pieces of furniture– let us know if you need any further assistance with anything along the way.